base_config_ClientArch=sun4u base_config_ClientEther=0:0:be:a8:22:70 base_config_ClientOS=SOL_10_1008S base_config_client_allocation="dhcp" base_config_products=" flash eiscd sds explo" base_config_sysidcfg_nameservice=NONE base_config_sysidcfg_network_interface=PRIMARY base_config_sysidcfg_ip_address=10.18.139.35 base_config_sysidcfg_netmask=255.255.255.128 base_config_sysidcfg_root_password="boajrOmU7GFmY" base_config_sysidcfg_system_locale="C" base_config_sysidcfg_timeserver=localhost base_config_sysidcfg_timezone="Europe/Prague" base_config_sysidcfg_terminal=vt100 base_config_sysidcfg_security_policy=NONE base_config_sysidcfg_protocol_ipv6=no base_config_sysidcfg_default_route=10.18.139.1 base_config_x86_nowin="yes" base_config_profile_cluster=SUNWCXall base_config_profile_zfs_pool="rpool" base_config_profile_zfs_size="auto" base_config_profile_zfs_swap="auto" base_config_profile_zfs_dump="auto" base_config_profile_usedisk=rootdisk. base_config_profile_root=8192 base_config_profile_swap=2048 base_config_profile_s5_mtpt="/var" base_config_profile_s5_size="5800" base_config_ufs_logging_filesys="all" base_config_defaultrouter="10.18.139.1" base_config_notrouter="yes" base_config_dns_domain="czech.sun.com" base_config_dns_nameservers="129.157.16.140 129.157.128.79" base_config_dns_searchpath="czech.sun.com sun.com" base_config_dns_disableforbuild="yes" base_config_update_terminal="yes" base_config_enable_savecore="yes" base_config_dumpadm_minfree="20000k" base_config_noautoshutdown="pm_disabled" base_config_enable_rootlogin="yes" base_config_enable_rootftp="yes" base_config_shutup_sendmail="yes" base_config_disable_sysid_probe="yes" eiscd_product_version="latest" eiscd_patch_dir="/var/tmp" eiscd_space_required=2048 sds_product_version=default sds_root_mirror="c0t1d0" sds_use_fmthard="yes" sds_database_locations="rootdisk.s7:3 c0t1d0s7:3" sds_database_partition="s7:512 c0t1d0s7:512" sds_root_alias="rootdisk" sds_root_mirror_devalias_name="rootmirror" sds_mirrored_root_flag="yes" sds_device_numbers="/:d100:d110:d120 swap:d101:d111:d121 /var:d105:d115:d125" sds_md_tabfiles="md.tab" flash_archive_locations="nfs://10.18.139.80/STAGE/Img/FLAR/Sol10u6EISsep08-sf15k.flar" base_config_productdir="" base_config_patchdir="" base_config_debug_jumpstart_postinstall="" ############################################################################### # # Product: Explorer configuration # # Synopsis: This section contains details of how to set up # Explorer on this client. # # These configuration variables are IDENTICAL to the questions asked # during an interactive explorer install. # From VERSION 4.3 the interactive install has been removed # from the SUNWexplo package # ############################################################################### ############ # # Which version of the product is to be installed # # explo_product_version="5.13" # # If you suspect other products etc of installing Explorer already, # set this value to anything other than "" and the module will # remove any other versions of Explorer, prior to trying to install # this one. # explo_override_old_installs="" # # We have wo methods for handsfree install of Exploer # 1) Fill out the varialbes as normal or # 2) follow the steps below to create a default file and use that # # To create a defaults file build a client , # run explorer -g and copy the /etc/opt/SUNWexplo/default/explorer file # to a location on the JET server and enter its name # in the expo_DEF variable. # # Location of explorer default file to be used # eg:- exp_DEF="custa-defaults" # This will be copied to /etc/opt/SUNWexplo/default/explorer # Usiing this method will over ride all variables used below (except CRON) explo_DEF="" explo_SEARCHPATH="../common.files" # For individual clients place the file in the /Clients/ dir # For use on many clients place in /Clients/common.files # ############# # Automated explorer cron set up # # If you want explorer to run once a week, set CRONTAB-RUN to yes and set the # hour, minute and day variables to the time you want this run. # explo_CRONTAB_RUN="no" explo_CRONTAB_HOUR="*" explo_CRONTAB_MINUTE="*" # If running monthly enter day of week.(Day not greater than 28) explo_CRONTAB_DAY="*" # If running weekly enter day of week explo_CRONTAB_WEEKDAY="*" ################## # For later (5.6+) versions of explorer specify any options explo_CRONTAB_FLAG="" ############ # Enter the system serial number here: # explo_SERIAL="" ############ # # All the following information should be static for all machines # at a given site. # # Enter the Contract Number for the customer here explo_CONTRACT_ID="" ############ # # Enter the customer name. Alphanumeric characters only. # Spaces in the name must be replaced by underscores, # e.g. Sun_Microsystems_Inc # explo_CUSTOMER_NAME="Customer Company" ############ # # Enter the username/system administrator contact info here # explo_USER_NAME="Cu Name" explo_USER_EMAIL="cuname@email.com" explo_PHONE="+123456789" # if reply address is different enter, else leave blank explo_REPLY="" ############ # # Customer Information section: # explo_CUSTID="CuID" # explo_ADDRESS_1="AddrLine1" explo_ADDRESS_2="AddrLine1" explo_ADDRESS_CITY="CuCity" explo_ADDRESS_STATE="CZ" # # This is the full name of the country and not the code # ie explo_ADDRESS_COUNTRY="Sweden" # explo_ADDRESS_COUNTRY="Czech Republic" # # For a full list of country codes see README.codes # eg GB= United Kingdom explo_ADDRESS_ZIP="10000" ############ # # Explorer run information: # # If you want explorer to run on install put "yes" here, otherwise leave # as the default N. If "yes", the command line options can be specified. # A netrc can be included to support "ftp" transport, note the entry is # removed after explorer execution. # # e.g. explo_RUN="N" # e.g. explo_run_at_install_cmd="-T ftp://ftp.sun.co.uk/cores/uk/incoming" # e.g. explo_netrc_entry="machine ftp.sun.co.uk login anonymous password bt-advisors@sun.com" explo_RUN="N" explo_run_at_install_cmd="" explo_netrc_entry="" ############ # # E-mail addresses to send the explorer output. Include one of the # following depending on your location, and an optional comma separated # additional e-mail address. # North / South America (explorer-database-americas@sun.com) # Europe, Middle East, Africa (explorer-database-emea@sun.com) # Asia, Pacific (explorer-database-apac@sun.com) # None # # e.g. explo_EMAILTO="explorer-database-emea@sun.com,root@localhost" explo_EMAIL="explorer-database-emea@sun.com" ############# # Geographic Region # can be set to EMEA, APAC, AMERICAS # Country codes are found in files country_codes_ # in the Product/explo directory # explo_GEO="EMEA" explo_ADDRESS_COUNTRY_CODE="CZ" # # If you wish to be notified when the explorer has successfull been aded to the database # Add an email address here explo_NOTIFY="" ############# # # Explorer installation configurable defaults # Best left alone # explo_BASEDIR="/opt/SUNWexplo" explo_DEFAULTS="/opt/SUNWexplo/etc/default/explorer" explo_HOME="/opt/SUNWexplo" explo_LIB="/opt/SUNWexplo/lib" explo_PATH="/usr/bin:/usr/sbin" ############################################################################ # Available country codes EMEA,AMERICAS,APAC ############################################################################ # Found in files country_codes_